Replacement rubber tracks for the Takeuchi TB216 and TB016 mini excavators — OEM fitment, aftermarket price. RivalParts matches the exact track for your machine and gets it dispatched fast. Same fit as the dealer track, without the dealer markup. We supply plant hire, contractors and owner-operators across the UK and USA.
Takeuchi TB216 & TB016 rubber track size
| Track size | Width | Pitch | Links | Tread |
|---|---|---|---|---|
| 230 x 96 x 34 | 230mm (≈9″) | 96mm | 34 | L / block pattern |
The size is written as width x pitch x links — so 230 x 96 x 34 is 230mm wide, 96mm pitch, 34 drive links. This is the standard fitment for the Takeuchi TB216 and the earlier TB016, which share the same undercarriage. Always check the size stamped on the inside of your current track before ordering, as a small number of early machines were built with an alternative configuration.
Which tread should I choose?
- L / block pattern (standard) — the factory-style all-rounder. Good grip on hard and mixed ground, low vibration and a long wear life. The default for general groundwork and site duties.
- Multi-bar — more aggressive bars for wet, soft or muddy ground where the standard block starts to slip.
Will it fit my TB216 or TB016?
These tracks are built to the same dimensional spec as the original Takeuchi fitment — same 230mm width, 96mm pitch and 34-link count, same steel-corded reinforced rubber construction. They run on the standard sprockets and rollers and bolt straight on. If the size has worn off your old track, measure the width across the ground-contact face and count the links, or give us your machine and serial number and we’ll confirm.
Get a price for Takeuchi TB216 / TB016 tracks
Tell us your machine and the conditions you work in and we’ll recommend the right set. Competitive pricing, fast dispatch, tracks that fit first time.
Frequently asked questions
What size rubber tracks does a Takeuchi TB216 take?
The Takeuchi TB216 takes a 230 x 96 x 34 rubber track (230mm wide, 96mm pitch, 34 links). The same size fits the earlier TB016, which shares the same undercarriage.
Is the TB016 track the same as the TB216?
Yes. The Takeuchi TB016 and TB216 both use the 230 x 96 x 34 rubber track, so the same replacement set fits either machine.
Are aftermarket Takeuchi tracks as good as OEM?
A quality aftermarket track is built to the same size and steel-corded construction as the Takeuchi OEM track, so it fits the same sprockets and rollers and wears the same — at a much lower price.
How long do Takeuchi TB216 tracks last?
Expect roughly 1,200–2,000 hours depending on ground conditions, tension and how the machine is worked. Correct track tension and avoiding hard turns on abrasive surfaces extends their life.
Looking for tracks for a different machine? See our full rubber tracks guide and machine list.