Replacement rubber tracks for the Kubota KX36 mini excavator — OEM fitment, aftermarket price. RivalParts matches the exact track for your machine and gets it dispatched fast. Same fit as the dealer track, without the dealer markup. We supply micro and mini digger tracks to plant hire, groundworkers and owner-operators across the UK and USA.
Kubota KX36 rubber track sizes
| Model / generation | Track size | Width | Pitch | Links |
|---|---|---|---|---|
| KX36 & KX36-2 | 230 x 48 x 60 | 230mm (≈9″) | 48mm | 60 |
| KX36-3 | 230 x 48 x 64 | 230mm (≈9″) | 48mm | 64 |
The size is written as width x pitch x links — so 230 x 48 x 60 is 230mm wide, 48mm pitch, 60 drive links. The KX36 and KX36-2 take the 60-link track; the later KX36-3 takes the 64-link version. The width and pitch are the same across the range — it’s the link count that changes by generation, so it’s worth confirming which one you have before ordering.
Which tread should I choose?
- Block pattern (standard) — the factory-style all-rounder for a micro digger. Good grip on mixed ground, low vibration and a long wear life.
- Zig-zag / staggered — extra bite for soft, wet or sloping ground.
Will it fit my KX36?
These tracks are built to the same dimensional spec as the original Kubota fitment — same 230mm width and 48mm pitch, with the correct link count for your generation, in the same steel-corded reinforced rubber construction. They run on the standard sprockets and rollers and bolt straight on. The quickest way to be sure is to count the drive links on your current track (60 = KX36/KX36-2, 64 = KX36-3) or check the size stamped on the inside face. Not sure? Give us the machine and serial number and we’ll confirm.
Get a price for Kubota KX36 tracks
Tell us your machine generation and the conditions you work in and we’ll recommend the right set. Competitive pricing, fast dispatch, tracks that fit first time.
Frequently asked questions
What size rubber tracks does a Kubota KX36 take?
The Kubota KX36 and KX36-2 take a 230 x 48 x 60 rubber track, while the later KX36-3 takes a 230 x 48 x 64 track. The width (230mm) and pitch (48mm) are the same — the link count changes by generation.
How do I know if I have a KX36-3?
Count the drive links around the inside of your current track, or check the size stamped on the inside face. 60 links is the KX36 / KX36-2; 64 links is the KX36-3. The model number is also on the machine’s data plate.
Are aftermarket Kubota tracks as good as OEM?
A quality aftermarket track is built to the same size and steel-corded construction as the Kubota OEM track, so it fits the same sprockets and rollers and wears the same — at a much lower price.
How long do Kubota KX36 tracks last?
Expect roughly 1,200–2,000 hours depending on ground conditions, tension and how the machine is worked. Correct track tension and avoiding hard turns on abrasive surfaces extends their life.
Looking for tracks for a different machine? See our full rubber tracks guide and machine list.